FMC213- A Full Camera Link input card compatible with 1.8V IO based on FMC

Item No.: 213
Description
1. The Overview of the board card
This board card is specially designed to consider compatibility with 1.8V level IO, Virtex7, Kintex Ultrascale, and Virtex Ultrascale + FPGA, and hardware parameters can also be modified if compatible with the original 3.3V. The board card supports one channel Full Camera link input and one channel HDMI output.

2. Performance indicators
Function Parameters Contents
Camera link
Input
Chip type DS90CR288A
Channel amount One channel baseMiddle or Full
One channel uartfour channel cc
Rate 85Mbps
Video Maximum 8Byte
Transfer impedance The differential 100Ω
Connector Two channel SDR26
FMC signal IO type LVTTL
Electrical level 1.8V2.5V3.3V
HDMI输入 Channel amount One channel
Connector HDMI
Connector type FMC-HPC ASP-134488-01
  Front board Two channel SDR26 one channel HDMI
Standard FMC  ANSI/VITA 57.1 - 2008
Size 69X76.5mmThe mounting hole size is 2.7mm
weight  
Power supply +3.3V@0.5A
Power consumption 2W
Working temperature Industrial  -20℃ to +70℃
Support mother board Xilinx board V6V7KUVU ZYNQZU development board
Orihard board 13627036728833027439
       
3. Software content
The board card provides the Camera Link signal input interface program corresponding to FPGA board, including Camera Link, UART, CC signals; HDMI analog chip configuration and output analog signals.

4. Board card application
 The board card is configured with FPGA motherboard for industrial image signal processing.
 
5. Technical parameters
  • FMC interface, supporting Virtex7, Kintex Ultrascale, Virtex Ultrascale + FPGA.
  • One channel Full CamerLink input is supported.
  • Full = one Base + two Channel Link Base unit.
  • Maximum transmission speed: 5.4GB /S @ 85MHZ
  • A serial port for debugging, can support RS232 or RS485 protocol.
  • Support eight channel IO direct output, directly connected to FPGA.
  • The size of FMC card is: 76.5mmX69mm. The mounting hole size is 2.7mm.
  • Storage temperature: -20℃ ~ +70℃.
  • Operating temperature: 0℃ ~ +55℃ for commercial grade, -20℃ ~ +55℃ for industrial grade.
  • Working humidity: 10% ~ 80%.