FMC177- double receiver and double transmitter rf FMC sub-card based on AD9361

Item No.: 177
FMC177 rf module includes two receiving channel and transmission channel respectively, and its frequency could reach up to 70 MHZ ~ 6 GHZ, AD9361 chip provide cost-effective experimental platform, has reached 56 MHZ instantaneous bandwidth, higher sensiti
Description
1.The overview of the board card
FMC177 rf module includes two receiving channel and transmission channel respectively, and its frequency could reach up to 70 MHZ ~ 6 GHZ, AD9361 chip provide cost-effective experimental platform, has reached 56 MHZ instantaneous bandwidth, higher sensitivity, dynamic range of flexible, extensively suitable for the SDR (radio) software, mobile base stations, WiFi, wireless local area network (LAN), special or general radio equipment application. By using FMC177, the designer can effectively and simply use the AD9361 chip.
 

2 Main Indicators
 
1. Rf frequency: 70MHz~6GHz;
2. ADC/DAC acquisition: 12 bits;
3. Two channel TX, two-channel RX, work implementation mode duplex and half-duplex;
(4). RF matching resistance: 50 euros;
(5). Instantaneous bandwidth: 56MHz;
(6). Support DC power supply +12V;
(7). Support GPS;
(8). Specification: Standard FMC sub-card.
3 Board interface characteristics
  No. Items Specifications Remark
Tx 1 Frequency 70~6000MHz  
2 Bandwidth Up to 56 MHz real-time bandwidth, tunable
3 Transmission >5dBm CW
4 EVM <1.5% Typical:5dBm @20MHz bandwidth
5 Gain Control Range >80dB  
6 Gain Step 0.25 dB  
7 ACLR                < -45dBc @ 0dBm LTE output
8 Spurious TBD  
9 SSB Suppression 35dBc  
10 LO Suppression 50dBc  
11 DAC Sample Rate (max) 61.44MS/s  
12 DAC Resolution 12bits  
 
Rx 1 Frequency 70~6000MHz  
2 Bandwidth Up to 56 MHz real-time bandwidth, tunable
3 Sensitivity: -90dBm@20MHz Noise Figure < 8dB
4 EVM <1.5% @ -30dBm input
5 Gain Control Range >60dB  
6 Gain Step 1dB  
7 Blocking TBD  
8 Noise Figure <8dB Maximum RX gain
9 IIP3 (@ typ NF) -25dBm  
10 ADC Sample Rate (max) 61.44MS/s  
11 ADC Resolution 12bits  
12 ADC Wideband SFDR 78dBc  
  1 Voltage 3.3V  
2 ON/OFF TIME <6uS For TDD model
3 Duplexing Model TDD or FDD  
  4 W/ GPSDO Reference 0.01ppb  
 
4. Application Scope:
SDR (radio software);Mobile base stations such as Femto‐cells, Pico‐cells, Small‐cells, Micro‐cell, etc.WiFi.Wireless local area network;Special or general purpose radio equipment.
 
5. Set up the system with FPGA processing card
This board card connects FMC177_AD9361 RF transceiver module and K7 board card based on FMC through the standard FMC interface.