FMC150- Two channel 250Msps AD, two channel 600Msps DA FMC sub-card

Item No.: 150
1.Overview of the board card
The ADC adopt TI ADS62P49, has two channel 250 m, 14 bits, a total of 1 piece; DAC using ADI AD9122, has two channel, 16 bit, can reach 1.2 G, a total of one piece; Clock USES the AD9516, support board on the clock and external clock;Six SSMB interface in total, a FMC/LPC interface

2 Performance Indicators
The function of the board card Parameters Content
ADC Chip type ADS62P49
Channel amount Two channel ADC
Sampling rate 250Msps
Data bits 14bit
Digital interface DDR LVDS
Analog interface AC coupling
Analog input ±1V
Input impedance 50Ω
Analog indicators  
DAC Chip type AD9122
channel Two channel DAC
Conversion rate 600Mspsinterpolation
Data bits 16bit
Digital interface DDR LVDS
Analog interface AC coupling
Analog input ±1V
output impedance 50Ω
Analog indicators  
Clock PLL chip AD5616-1
The on-board crystal 10MHz  temperature-compensation crystal oscillator(TCXO) VCXO
External input clock Default 10MHz3.3V LVTTL electrical level
External trigger Channel amount One channel input
external synchronization electrical level 3.3V LVTTL electrical level
Connector type FMC-LPC ASP_134604_01
  Front panel Six channel  SSMB
Standard FMC  ANSI/VITA 57.1 - 2008
Size 69X76.5mm
Weight within heat sink
Power supply +12V@1A
Power consumption 8W
Working temperature Industrial  -20℃ to +70℃
Support motherboard Xilinx board V6V7KUVU ZYNQZU development board
Orihard board 13627036728833027439
 3.Software content
 Provide ISE or Vivado version of FMC interface AD input or DA output, clock configuration, external trigger access reference test program, supported FPGA model or board card see the instruction table.

4.Application of the board card
The board card is configured with FPGA motherboard for acquisition scenes of analog signal, radio, photoelectric and radar.