Fmc141-four channel 250Msps 16bit AD FMC sub-card

Item No.: 141
1. Overview of the product
This board is based on the FMC standard board, which realizes the function of four channel 16-bit/250Msps ADC. Following VITA 57 standard, the board card can be directly connected to xilinx company or our company's FPGA board. The ADC device USES ADI 9467 chip, and users can configure the working state of the chip through the FMC interface.

2 Performance Indicators
The function of the board card Parameters Contents
ADC Chip type AD9467
Channel amount Four channel ADC
Sampling rate 250Msps
Data bits 16bit
Digital interface DDR LVDS
Analog interface Ac coupling
Analog input ±1V
Analog standard  
DAC no  
Clock PLL chip AD9516-1
The on-board crystal 10MHz temperature-compensation crystal oscillator(TCXO) VCXO
External input clock Default 10MHz3.3V LVTTL electrical level
External trigger Channel amount 1channel input
Electrical level 3.3V LVTTL electrical level
external synchronization Channel amount One channel input
Electrical level 3.3V LVTTL electrical level
Connector type FMC-HPC ASP-134488-01
  Front panel ten channel SSMB
Standard FMC  ANSI/VITA 57.1 - 2008
Size 69X76.5mm
Weight within heat sink
Power supply +12V@1A
Power consumption 8W
Working temperature Industrial  -20℃ to +70℃
Support motherboard Xilinx board V6V7KUVU ZYNQZU development board
Orihard board 13627036728833027439

3. Software content 

Provide ISE or Vivado version of FMC interface AD input or DA output, clock configuration, external trigger access reference test program, supported FPGA model or board card see the instruction table.
4. Software application
The board card is configured with FPGA motherboard for acquisition scenes of analog signal, radio, photoelectric and radar.