| Board function. | Parameters. | Content. |
| PS end | ARM | Dual core A9 MPCore, up to 866MHz. |
| DDR | DDR3 1GB 32bit@800MHz. | |
| QSPI Flash | 256Mb | |
| EMMC | 8GB | |
| SD Card | 16GB SD card available | |
| RS232 | 2-way RS232 | |
| USB | 1 way USB2.0, 1 way RS232 to USB debug port | |
| The network | 1-way Gigabit RJ45 Ethernet | |
| Touch screen | 4.3 inch touch capacitive screen | |
| PL end | Logical resources | 85K Logic Cells，4.9Mb BlockRAM，220 DSP Slices |
| Extend IO | 32bit LVTTL 3.3V | |
| ADRV9002 |
Transceiver channel | Double receiving and sending, supporting MiMo |
| Transceiver bandwidth | Frequency range 30 MHz to 6000MHz; bandwidth 12 kHz to 40 MHz | |
| Digital interface | LVDS and CMOS synchronous serial data interface options | |
| Clock | 32.768MHz TCXO of 0.5ppm | |
| Upgrade AD9361 performanc | ● Support for narrowband Transmitter and receiver bandwidth from 12 kHz to 40 MHz ● Receiver provides 20dB gain, attenuator prior to the mixer provides 34dB total gain control range in 0.5dB steps ● Multi-Chip Synchronization ● Automatic Gain Control ● Programmable FIR Channel Filters ● Fast Frequency Hopping ，Standards as fast as <20us Refer to ADRV9002/3/4 Agile, SDR Transceiver Family Introduction documentation |
|
| Board size | Long 150mm, wide 95mm | |
| Board weight | (including heatsink) | |
| Board power supply | +12V@2A | |
| Board power consumption | 20W | |
| Operating temperature | Industrial -20℃ to +70℃ | |
| Board function | Parameter content | |
| Main processor | XC7Z020-2CLG484I | |
| Software version | Vivado2021.2 | |
| programing language | Verilog | |
| PL side test program | ADRV9002 channel interface program | |
| LED test program | ||
| IO test program | ||
| AXI bus DMA Test Program | ||
| PS end bare Metal Test Program | DDR3 test program | |
| Network test program | ||
| RS232 test program | ||
| QSPI Flash test program | ||
| Emmc test program | ||
| SD Card test program | ||
| AXI bus DMA Test Program | ||
| PS operating system program | Uboot version | U-Boot 2017.01 |
| LINUX kernel version | LINUX-4.6.0-g399574f | |
| Serial port software | Xshell6；secureCRT7.0 | |
| Vivado version | 7z100_vivado2017.4@2017.4 | |
| DDR3 read and write on PS side | ||
| HDMI display | (not available by default) | |
| USB interface test | ||
| Network port test | ||
| Serial port test | ||
| QSPI Flash memory | U16 | |
| SD card starts the test | ||
| EMMC memory | ||
